Ruckus T310s |
Wifi |
Wi-Fi Standards |
IEEE 802.11a/b/g/n/ac Wave 2 |
Supported rates |
802.11ac: 6.5 to 876Mbps (MCS0 to MCS9, NSS = 1 to 2 for VHT20/40/80, NSS = 1 to 2 for VHT80) |
802.11n: 6.5 Mbps to 300Mbps (MCS0 to MCS15) |
802.11a/g: 54, 48, 36, 24, 18, 12, 9 , 6Mbps |
802.11b: 11, 5.5, 2 and 1 Mbps |
Supported channels |
2.4GHz: 1-13 |
5GHz: 36-64, 100-144, 149-165 |
MIMO |
2x2 SU-MIMO |
2x2 MU-MIMO |
Spatial Streams |
2 SU-MIMO |
8022 MU-MIMO |
Channelization |
20, 40, 80MHz |
Security |
WPA-PSK, WPA-TKIP, WPA2 AES, 802.11i, Dynamic PSK |
WIPS/WIDS |
Other Wi-Fi Features |
WMM, Power Save, Tx Beamforming, LDPC, STBC, 802.11r/k/v |
Hotspot, Hotspot 2.0 |
Captive Portal |
WISPr |
PERFORMANCE & CAPACITY |
Peak PHY Rates |
2.4GHz: 300Mbps |
5GHz: 867Mbps |
Client Capacity |
Up to 512 clients per AP |
SSID |
Up to 31 per AP |
RUCKUS RADIO MANAGEMENT |
Antenna Optimization |
BeamFlex+ |
5GHzPolarization Diversity with Maximal Ratio Combining (PD-MRC) |
Wi-Fi Channel Management |
ChannelFly |
Background Scan Based |
Client Density Management |
Adaptive Band Balancing |
Client Load Balancing |
Airtime Fairness |
Airtime-based WLAN Prioritization |
Smart Cast Quality of Service |
QoS-based scheduling |
Directed Multicast |
L2/L3/L4 ACLs |
Mobility |
SmartRoam |
Diagnostic Tools |
Spectrum Analysis |
SpeedFlex |
NETWORKING |
Controller Platform Support |
SmartZone |
ZoneDirector |
Standalone |
Mesh |
SmartMeshTM wireless meshing technology. Self-healing Mesh |
IP |
IPv4, IPv6 |
VLAN |
802.1Q (1 per BSSID or dynamic per use based on RADIUS) |
VLAN Pooling |
Port-based |
802.1x |
Authenticator & Supplicant |
Tunnel |
L2TP, GRE, soft-GRE |
Policy Management Tools |
Application Visibility and Control |
Access Control Lists |
Device Fingerprinting |
Rate Limiting |