| Ruckus R720 |
| Physical Characteristics |
| Power1 |
DC Input: 12 VDC 2A |
| PoE: 802.3af/at/bt |
| Physical Size |
23 cm (L), 21 cm (W), 6 cm (H) |
| Weight |
1.12 kg (2.5 lb.) |
| Ethernet Ports |
One 2.5Gbps Ethernet port and one 1Gbps Ethernet port |
| Power over Ethernet (802.3af/at/bt) with Category 5/5e/6 cable |
| Link Aggregation (LACP) |
| USB Port |
USB 2.0 |
| Type A connector - ideal for BLE dongles and sensors |
| Mounting Options |
Electrical wallbox; Standard US and EU single gang wall jack |
| Optional bracket for offset & wall mount |
| Environmental Conditions |
Operating Temperature: -4ºF (-20ºC) - 140ºF (60ºC) |
| Operating Humidity: up to 95% non-condensing |
| Lock Options |
Hidden latching mechanism |
| Kensington Lock Hole |
| T-bar Torx |
| Bracket (902-0108-0000) Torx screw & padlock (sold separately) |
| Power Draw |
5.5W (minimum) |
| 11.4W (typical) |
| 12.95W peak with 802.3af |
| 25W peak with 802.3at |
| 35W peak with full power |
| RF |
| Antenna |
Adaptive antenna that provides up to 4000+ unique antenna patterns |
| Maximum transmit power (aggregate) is 28dBm for both 2.4 & 5GHz |
| Physical Antenna Gain |
3dB (2.4 and 5GHz) |
| Beamflex+ SINR Tx Gain2 |
Up to 6dB |
| Beamflex+ SINR Rx Gain |
Up to 3-5dB |
| Interference Mitigation |
Up to 15dB |
| Minimum Rx Sensitivity3 |
-104dBm |
| Performance and Capacity |
| PHY Data Rates |
Up to 800 Mbps (2.4GHz) |
| Up to 1733 Mbps (5GHz) |
| Concurrent Stations |
Up to 512 |
| Simultaneous VoIP Clients |
Up to 60 (802.11e/WMM), 30 per radio |
| Network Architecture |
| IP |
IPv4, IPv6, dual-stack |
| VLANs |
802.1Q (1 per BSSID or dynamic, per user based on RADIUS) |
| Port-based |
| 802.1x for Wired Ports |
Authenticator |
| Supplicant |
| Tunneling |
L2TP |
| Multimedia and Quality of Service |
| 802.11e/WMM |
Supported |
| Software Queues |
Per WLAN priority (2), Per traffic type (4), per client |
| Traffic Classification |
Automatic, heuristics and TOS based or VLAN-defined |
| Rate Limiting |
Dynamic per-user or per-WLAN |
| Management |
| Deployment Options |
Standalone (individually managed) |
| Centrally managed |
| Wi-Fi |
| Standards |
IEEE 802.11a/b/g/n/ac |
| Supported Data Rates |
802.11ac: 29.3 Mbps – 1733 Mbps (160MHz4) |
| 802.11n: 6.5 Mbps – 216.7 Mbps(20MHz) 13.5 Mbps – 800 Mbps (40MHz) |
| 802.11a: 54, 48, 36, 24, 18, 12, 9 and 6 Mbps |
| 802.11b: 11, 5.5, 2 and 1 Mbps |
| 802.11 Gbps: 54, 48, 36, 24, 18, 12, 9 and 6 Mbps |
| Radio Chains |
4x4 |
| Spatial Streams |
4 |
| MIMO |
SU-MIMO — Up to 4 streams |
| MU-MIMO — Up to 3 streams |
| Channelization |
20MHz, 40MHz, 80MHz, 80+80MHz and/or 160MHz |
| Frequency Band |
IEEE 802.11ac: 5.15 – 5.85 GHz |
| IEEE 802.11a/n: 5.15 – 5.85 GHz |
| IEEE 802.11b: 2.4 – 2.484 GHz |
| BSSIDs |
Up to 16 (2.4 GHz) |
| Up to 16 (5 GHz) |
| Power Save |
Supported |
| Certifications* |
WEEE/RoHS compliance |
| EN 60601-1-2 Medical |
| Wi-Fi Alliance certified |
| UL 2043 plenum rated |
| Subway and Railroad Certifications |
EN50121-1 EMC |
| EN50121-4 Immunity |
| IEC 61373 Shock & Vibration |